Our Plastering Services

• Wall and ceiling plastering
• Plasterboard installation
• Repairs and patchwork
• Skimming and rendering

Our skilled team guarantees a flawless finish that enhances the appearance and durability of your property's interiors.

How to Plaster a Wall for Beginners.

Plastering a wall as a beginner can seem daunting, but with the right tools, materials, and steps, you can achieve a smooth and professional finish.

Step-by-step

Tools and Materials Needed:

1. Tools:

• Plastering trowel
• Hawk
• Mixing bucket
• Paddle mixer (or drill with a mixing attachment)
• Plastering float
• Spirit level
• Sanding block (optional)
• Sponge or brush

2. Materials:

• Plaster (e.g., Multi-Finish or Bonding Coat)
• PVA glue (to seal the wall)
• Clean water
• Dust sheets and masking tape

Preparation

1. Clean the Wall

• Remove any loose paint, wallpaper, or debris.
• Ensure the wall is free of dust and grease.

2. Apply PVA Glue

• Mix PVA with water in a 1:4 ratio (1 part PVA, 4 parts water).
• Apply the PVA solution to the wall using a brush or roller to seal the surface.
• Let it become tacky (not fully dry) before applying plaster.

3. Protect Surroundings

• Use dust sheets to cover the floor and tape off edges to avoid mess.

Mixing Plaster

• 1. Follow the manufacturer's instructions on the plaster bag.
• 2. Add clean water to the bucket first, then gradually add plaster powder.
• 3. Mix using a paddle mixer until the consistency is smooth and lump-free (like thick cream).
• 4. Avoid mixing too much at once, as plaster sets quickly (20-30 minutes).

Plastering Steps

1. Apply the First Coat:

• Load your hawk with plaster and use your trowel to scoop some onto the wall.
• Start from the bottom and work upwards in a smooth, sweeping motion.
• Apply a thin, even layer about 2mm thick.
• Use the spirit level to ensure it's straight.

2. Smooth the Surface:

• Once the plaster begins to set (but is still wet), smooth out uneven areas with your trowel.

3. Apply the Second Coat:

• Mix fresh plaster.
• Apply a second coat, slightly thinner (1mm) than the first.
• Smooth the surface as you go.

4. Tidy the Edges:

• Use a damp sponge or brush to clean corners and edges.

5. Finishing Touches:

• When the plaster is nearly dry but still workable, use a clean trowel or float to polish the surface by applying light pressure.
• Use a little water (spray bottle or wet brush) to assist in smoothing.

Curing and Decorating

• 1. Let the plaster dry naturally for 5-7 days.
• 2. Sand lightly if needed to remove any imperfections.
• 3. Apply a mist coat (a watered-down emulsion paint) before painting.

Tips

• Practice on a small area first.
• Work in manageable sections to avoid the plaster setting before you finish.
• Keep your tools clean, as dried plaster can ruin your finish.

Whether you need flawless plastering for a fresh look or smooth walls ready for painting, LEXI Constructions delivers professional results every time.

📞 Call Us Today at 07482051203

📧 Email Us at olexii@lexi.ltd

🌐 Visit Other Pages of our website lexi.ltd

✔️ Why Choose Us?

• Experienced plastering specialists
• Smooth, durable, and long-lasting finishes
• Affordable and tailored to your needs

Don't wait—give your property the perfect finish it deserves!